示例图片二

移动式升降机不起升的故障原因

  移动式升降机,移动式升降渠道,不起升毛病原因

  这些形成移动式升降机不起升的原因你知道吗?移动式升降机能够在不同高度作业状态下快速、慢速行走,可以在空中方便的操作渠道连续完结上下、行进、撤退、转向等作业,移动式升降机(移动式升降渠道)广泛用于工厂车间、广场大堂机场、园区等有高空作业需求的客户。移动式升降机使用时间久都会遇到各式各样的问题,东莞华楠骏业给我们讲讲形成移动式升降机不起升的原因有哪些。

  一、查看电机。

  1、按上升或下降按钮电机不滚动

  查看以下毛病:1)控制箱电源是否开了;2)重启失压按钮;3)查看行程开关是否坏了;

  2、按上升或下降按钮,电机滚动,升降机不动。

  查看电机有没有反转,如有恣意改变三相中的两相。

  二、溢流阀有没有安装好?从头调理溢流阀。

  三、查看液压体系的油管有没有漏油,拧紧接头或更换油管。

  四、查看电器元件有没有断开或损坏,如有则替换。

  五、查看机械部分有无损坏卡死,如有需求告诉厂家修理。

移动式升降平台

  Mobile elevator, mobile lifting channel, no cause of rising trouble

  The mobile lift doesn't lift the reason you know? Mobile lift can vary in height the operation condition for fast, slow walk, can work in the air, convenient operation, continuous channel end on March, retreat, steering, mobile lifts (mobile lifting channel) are widely used in factory workshop, Plaza the airport lobby, parks and other high-altitude operations needs of customers. Mobile lift using long time will meet every kind of problem, Dongguan Hua Nan Junye tell us form a mobile lift doesn't lift the reason what.

  1. Check the motor.

  1. The motor does not roll by the push or drop button

  Check the following problems: 1) whether the power supply of the control box is open; 2) restart the press button; 3) check whether the stroke switch is bad;

  2, press up or drop button, motor rolling, lift is not moving.

  Check whether the motor has a reversal, such as unscrupulously changing the two phase in the three-phase.

  Two, does the overflow valve have been installed well? The overflow valve is adjusted from the head.

  Three. Check the oil pipe of the hydraulic system to leak oil, tighten the joint or replace the tubing.

  Four, check the electrical components are not broken or damaged, if there is a replacement.

  Five, check the mechanical part of the card is damaged or not, if there is need to tell the manufacturer to repair.